Hi-temperature Silicone Sealant (red)

Home » Stove & Fireplace » Stove » Maintenance Products » Silicone Sealant » Hi-temperature Silicone Sealant (red)

Hi-temperature Silicone Sealant (red)

Listing

Tube
KK0321 80 mL (US 2.7 fl. oz.)

Cartridge
KK0205 304 mL (US 10.3 fl. oz.)

MAY IRRITATE EYES. MAY IRRITATE SKIN. DANGEROUS FUMES FORM WHEN MIXED WITH OTHER PRODUCTS. Do not mix with other household chemicals. Do not get in eyes. Do not get on skin or clothing. Do not breathe fumes. Keep out of reach of children.

FIRST AID TREATMENT: Contains Dimethyl Siloxane Hydroxy Terminated, Ethyltriacetoxy Silane and Methyltriacetoxy Silane. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for at least 15 minutes. If on skin, rinse well with water.

Tube: Meets the requirements of MIL-A-46106A, Amendment2, Type 1.

Cartridge: Meets the requirements of MIL-A-46106A, Amendment 2, Type 1.
Authorized by the United States Department of Agriculture for use in federally inspected meat and poultry plants. Certified by NSF.
Agriculture Canada Approved.

Overview

Flexible waterproof silicone sealant
Use on metal, glass, wood and plastic
Resists temperatures up to 316°C (600°F)
MSDS - Silicone Sealant Hi-Temp Red

Applications

High Temperature Silicone Sealant for any application that requires a permanently flexible waterproof seal that will withstand moisture, heat and vibration. Adheres to clean metal, glass, most types of wood, ceramic, plastic, brick and slate. Fully cured, it can be used for extended periods at temperatures up to 260°C (500°F) and for shorter periods as high as 316°C (600°F).

Directions

TUBE: Surfaces must be clean and dry. Remove cap and cut nozzle to desired size opening. Apply by pushing sealant ahead of nozzle. Tool sealant immediately after application. Sealant can be applied in temperatures as low as –65°C (-85°F) provided the surfaces are dry and frost free. Dry to touch in 30 minutes; cures fully in 24 hours.

CARTRIDGE: Surfaces must be clean and dry. Cut nozzle for desired bead size at a 45° angle. Using a caulking gun, apply by pushing sealant ahead of nozzle. Tool sealant immediately after application. Sealant can be applied in temperatures as low as –65°C (-85°F) provided the surfaces are dry and frost free. Can be applied overhead or on sidewall joints and surfaces without sagging, slumping or running off. Dry to touch in 30 minutes; cures fully in 24 hours.