Remove rust and other surface residue to ensure a good bond with the paint. Mask off surroundings to protect against over-spray. Surface temperature should not exceed 38°C (100°F). Shake can vigorously for one minute. Hold can 25-30 cm (10-12”) away from the surface. Spray surface using a smooth sweeping motion to avoid runs or sags. Allow 15 minutes to dry, and then apply a second coat if required. Let stand 24 hours before putting equipment into service. Provide ventilation when firing stove for the first time after painting. Some smoke and odors are given off during this process.
Contains 2-Butoxyethanol and Dimethyl Ether. May be harmful or fatal if swallowed. Contents under pressure. Intentional misuse by concentrating
and inhaling the product can be harmful or fatal. Avoid contact with skin, eyes, and mucous membranes.
Wear protective eyewear and use rubber gloves. Keep away from heat, sparks, and flames. Do not puncture, incenerate or crush container. Do not expose to heat or store at temperatures above 120°F (49° C) as container may burst. Avoid prolonged exposure to sunlight. Use with adequate ventilation. KEEP OUT OF REACH OF CHILDREN.
EYES: Immediately flush with water for 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get prompt medical attention. SKIN: Wash off with soap and water. INGESTION: Drink several glasses of water. Do not induce vomiting. Call a poison center, emergency room, or doctor immediately.
Ideal for wood, coal or pellet stoves, stove pipes and barbecues
We design, manufacturer, assemble, and distribute over 7000 metal and plastic heating, air conditioning, ventilation, and building products for use in homes and commercial buildings. Maintenance, renovation, or construction - we've got what you need.
